What Is the Cost of Installing an Electronic Gate?

For homeowners who want to boost home security but do not want to physically open and lock a gate each time they approach or exit their property, electric driveway gates are a popular option. Electric gates can cost up to three times as much as manual gates when installing one of these gates, among other cost considerations.

When estimating the cost of installing an electric gate, consider the size of the gate, any electrical work or wiring necessary, additional hardware, concrete, and post-installation costs. Due to the electronics used, electric versions are more expensive because most are opened using a remote control, keypad, or voice sensor, which calls for more expensive materials and a skilled technical installer.

The cost of installing an electric gate is determined by the material used.

Item Cost
Gate $600-$3,000
Posts ($25-$100 each) $50-$400
Concrete Work ($10-$50 per post) $10-$200
Opener Kit (includes motor and arm) $1,000-$3,500
Sensors, keypads, intercoms, remotes, etc. $100-$2,000
Labor $30-$80
Total Average Cost $1,790-$9,180

 

Cost of the gate by material:

 

Gate Type Cost Pros/Cons
Vinyl $600 Cheap and easily broken
Wood $2,000 Looks fantastic but is high-maintenance.
Steel $2,200 Heavy, low-maintenance alternative
Wrought Iron $2,300 Attractive but difficult to install
Aluminum $3,000 Lightweight, yet easily dented.

 

The Costs to Consider

You might be asking how much an electric gate costs if these advantages have piqued your interest in purchasing one for your property.

Several things influence the pricing. Some of these components are the type, material, and installation of your electric gate. However, you should be prepared for them to demand more than just the initial payment. Electric gates will require additional costs to operate. Take into account both your electricity bill and upkeep.

In addition, almost any style of gate you select will cost more. However, if you choose wisely, they can be reduced. Take into account the total cost of installing an electronic gate.

Motorized Wood Fence At HomeThe Material You Choose

The material you select for the gate will take up most of your budget. The following is a pricing guide for typical electronic gate materials based on HomeAdvisor data:

  • An aluminum gate will cost between $2000 and $4000.
  • A steel gate will cost between $600 and $4000.
  • A vinyl gate will cost between $200 and $1000.
  • A wooden gate will cost between $300 and $4000.
  • A wrought-iron gate will cost between $600 and $4000.

To better comprehend the price of operating an electric gate, it would be great if you paid particular attention to these numbers. Different types of homes are drawn to wooden gates. They seem to be very classic. However, they are incredibly prone to degeneration with time, particularly when moisture exposure. Softwood is the least cheap material; however, it is not strong.

Despite being more expensive, hardwood has the same issues as softwood. Simply, it will take longer for them to show up. Wooden gates will need a lot of maintenance and may need to be replaced after a while.

Wrought iron has a refined and elegant appearance. But with time, the expense of maintaining it will rise. It rapidly erodes. The investment might not be worthwhile if you don’t intend to clean and lubricate it regularly.

The most durable options on the list are gates made of steel and aluminum. With little upkeep, they will last for many years. They will run efficiently and effectively with few unforeseen costs.

The most economical alternative is vinyl gates. That they wouldn’t be able to endure long-term damage is what you should have expected. They might eventually need to be replaced.

The Type You Choose

The kind of gate you select will affect the cost of an electric gate. Electric gates come in two varieties: sliding gates and swinging gates. With an electric swing, you can anticipate the following, according to Fixr data:

A single swing gate will cost between $500 and $3000.

  • A double swing gate will cost between $1000 and $4000.
  • The uphill swing gate will cost between $2000 and $4000.
  • Lift and swing will cost between $2000 and $6000.

 

Comparatively, swinging gates are often used as sliding gates. They can occasionally cost more than sliding gates, especially if your house is on a slope or hill. The following are the sliding electric gate pricing, according to Fixr:

  • A slide V track gate will cost between $500 and $3000.
  • A sliding rear pipe gate will cost between $500 and $3000.
  • A slide cantilever will cost between $1000 and $4000.

Optional Features You May Choose to Include

A more excellent installation price will be assessed if you add other features. The estimated costs for other parts from HomeAdvisor and Fixr are as follows:

  • Keypads will cost between $100 and $500.
  • Sensors will cost between $300 and $500.
  • The intercom will cost between $350 and $2000.
  • Dual Bollards will cost between $3000 and $6000.
  • Cameras will cost approximately $80.
  • Emergency Personnel Access with a simple lockbox will cost between $50 and $75. It will cost roughly $500 to integrate it with your home security system.

Labor Cost to Install Electric Gates

ManishmaInstalling an electric gate is best left to the experts, like any other technical task. In addition to the risk of electric shock, a novice homeowner could easily harm their just purchased equipment. The homeowner may be responsible for thousands of dollars they cannot use or are not compensated for if the warranty does not cover these losses. An understanding of electronics and the mechanism is necessary for installing an electric gate. This verifies that all emergency release mechanisms are in working order, the door opens and closes within the allocated period, and it opens and closes in the proper direction.

Installation of an electric gate shouldn’t take more than 24 hours. Remember that this only applies to the gate and its software. An afternoon can be spent building a smaller structure. More extensive options can need a whole day for installation. The cost to install an electric gate is affected by several variables, including the gate’s size, material, and automated system type. Labor and installation fees range from $750 and $4,800. Construction of larger, more sophisticated gates may take longer and cost more money than constructing lighter gates, gates with two swinging or sliding pieces, and gates with added features like sensors and cameras.

The most evident factor to take into consideration is location. The professional installation may charge you more to make up for their extra time if you live in a more remote area (such as a farm or ranch). You should also consider the kind of gate and opening mechanism you want. Installing a straightforward gate takes less time and uses fewer tools. It takes more time, effort, and knowledge to install a large wooden gate with a hydraulic arm that works as a vertical lift gate.

What Can You Anticipate From Automatic Gate Installation?

It typically takes two days to install a gate professionally, one day for mounting the gate fixture and the other for installing the automation parts. Both components of the project are time-consuming and labor-intensive, necessitating specialized attention and the use of particular technology.

Installing an automatic gate might cost between $750 and $1,800, plus an extra $1,500 to $3,000 for the automated system, depending on the project’s extent. The price will be much lower if you already have a fence and are just installing the automatic gate mechanism instead of installing a wall in addition to the automatic gate.

Get in touch with Split Rail Fence for a customized installation quote to know the cost of installing a gate on your Colorado Front Range property. For the particular terrain of your land, we can help you determine the best design, material, and configuration in addition to the anticipated material and labor expenses.

Price of Electric Gate Openers

Light-duty, medium-duty, and heavy-duty automated gate openers are all readily accessible. The least expensive openers use 12 volt DC power, whereas hydraulic openers are the most costly. There are also different security systems, including open/close systems, vehicle detection, keypad and voice communication, card readers, video systems, etc. Consider your needs and steer clear of the most expensive option. This is crucial when comparing electric gate prices and looking for the best deal.

The most economical systems typically cost $5,000 or less. The most expensive ones cost between $5,500 and $11,000, or between $12,000 and $18,000. It costs about $35,000 and includes premium columns, double swing gates, hydraulic openers, camera systems, card readers, vehicle identification, and other amenities.

If you shop wisely, a light-duty opener will run you about $250. It’s astounding to have 12-foot gates. An average medium-duty gate weighs about 550 pounds of steel and costs about $400. Heavy-duty gates up to 18 feet long can be opened. When comparing prices, the average starting price for an electric gate is $450 for a single entrance and $600 for a pair of gates.

How Much Does it Cost to Run Electric Gates?

Electric gates are frequently perceived as a lavish element of the mansions of the rich and famous. You’ll be shocked to learn that they are surprisingly widespread. Any home can benefit from having an electric gate. They aren’t just for big houses.

Electric gates offer several advantages. They are lovely in the first place. You may make an impression on visitors before arriving at your house. You’ll also save time as you won’t have to get out of your car whenever you want to open your gate. And automation is a big deal in our age. When gates can be automated, why bother with manual openings?

The advantages of electronic gates go beyond these; Here are numerous others:

  • They are safe.
  • You need not be concerned about forgetting to close your gate.
  • Animals and children are allowed to roam without fear of being hit by a car.
  • They are pretty adaptable. The kind of gate, the material, and other elements are yours to select. The electric gate that best fits your budget can then be chosen.
  • They will raise the value of your house. So you can use this if you want to travel somewhere else in the future. Over time, electric gates will provide a great return on investment.
  • Insurance companies might give you a cheaper estimate. This is because electronic gates improve your property’s security and reduce the possibility of break-ins. The insurance business understands this.
Your Electric Bill

It’s possible that electric gates won’t be as expensive on your electricity bill as you might think. An electric gate uses about 100W per day when it is on standby. At the moment, 1 kWh of electricity costs about 13 cents. Your daily payment would go up by 1.3 cents as a result.

The electric gates consume 700 Watts of power when in use. However, it takes 20 to 30 seconds to open and close them. The times you pass through the gates will determine how much money is added to your account. But it will still be insignificant. Electronic gates shouldn’t be abandoned due to the cost.

You can use solar power if you don’t want the gate to increase your utility cost. You could also want to look into solar power if connecting the power source to your entrance is challenging. Solar power will keep your gate operating in the event of a power loss. According to Fixr, a solar power package will cost between $260 and $800.

Additional Costs and Elements

  • Electric components – The most pricey part of the process will be the electronic components of your new electric gate. To save money on hardware, think about gate opener kits and features with everything you need in a single box.
  • Gate’s size – The size of your gate will also impact the project’s price. For instance, if your driveway is one width, you will need a smaller gate than if it is two widths.
  • Gate installer – You may choose the best motor and hardware for your selected gate model with the help of an experienced gate installer. This will help you stay within your budget while producing a top-notch product and installation.
  • Taxes and licenses – Taxes and license fees are not incorporated in this estimate. Numerous cities and municipalities may demand a permit because of fence work. To be sure, confirm with your installation service.
  • Permits – A building or gate permit is necessary for the United States to install an electronic gate. States and even localities have a great deal of variation in the type of authorization and the associated charge.
  • DIY – DIY is not advised. Although it is not recommended, installing an electronic gate is practical. Homeowners should only attempt do-it-yourself electrical installations with prior electrical system understanding. In most cases, getting in touch with the manufacturer is enough to get the gate and related parts. Instead of putting yourself and others at risk, it is preferable to employ a subcontractor to install the electrical system. If you do not install it correctly, the manufacturer’s warranty will likely not cover it.
  • Home Value – A home worth installing an electric gate may be costly. Your house gains in value and appeal when you sell it. We sincerely appreciate the improved curb appeal and aesthetics.
  • Insurance – You can be entitled to a reduction in your homeowner’s insurance cost because your new electronic gate makes your house safer and lowers the likelihood of a break-in. Many homeowner’s insurance policies will contribute to the cost of opener repairs near you in the event of damage. However, it would help if you hold all the necessary licenses for your electronic gate to work. Insurance does not cover illegal work.
  • Resistance against the wind – You must pick a sturdy electric gate if you live in a windy area or are frequently exposed to storms (including hurricanes and tornadoes). Metal gates are typically the best option in these situations. However, it would be best to consider how the opening mechanism will be safeguarded during the storm. The popularity of underground openers belies their low exposure. If you decide on an above-ground motor, protect it fully.
  • The cost of power increases – The additional energy needed to open and close your gate if you don’t have a solar gate opener will be deducted from your regular electricity bill. It uses 100 Watts per day if it isn’t opened or closed. This amounts to just a few pence a day in many places. When operating, your gate motor uses up to 700 Watts of energy for 20 to 60 seconds. Electric gates are essential to think about even though they don’t significantly increase your electricity usage.
  • Lifespan – Electric gates are built to last. They are long-lasting and can live for many years if properly cared for. Routine maintenance and replacement of highly active components may be required to extend the life of your electric gate. Like any other household item, its longevity is determined by how well you maintain it.

Can a Driveway Gate Raise the Value of a House?

Yes, a home’s value can increase by $50,000 with an automatic driveway gate. The gate’s ability to improve the home’s curb appeal and add security causes a substantial increase in value. Therefore, even though the upfront fees seem expensive, you will undoubtedly make money when it comes time to sell the house.

Is a Permit Necessary to Install an Automatic Driveway Gate?

Planning authorization may be necessary for some regions in the form of a permit, typically costing between $150 and $200. However, your knowledgeable installer will be able to inform you of the particular requirements for your project and location.

Ten Different Automatic Driveway Gates and Their Prices

A wide variety of automatic driveway gates are available to homeowners and business owners. Your gate’s design, components, and appearance may all be changed, as well as the motor and power supply. This provides the ability to choose the gate that best suits your needs.

Aluminum Electric Gates

Aluminum gates can be lightweight and have a sleek appearance, but they are more expensive and prone to denting, costing between $2,000 and $4,000.

Bi-Fold Swing Gates

Bi-fold swing gates include two parts for the main entrance that open simultaneously, similar to French doors. Bi-fold swing gates cost between $1,000 and $4,000, slightly more expensive than regular swing gates.

Curving Sliding Gate

A curved sliding gate can be the best choice if you respect the beauty and elegance of a sliding gate but only have a small amount of space. A curved sliding gate will turn around a corner and change direction when it is opened. When opened, some designs allow the gate to slide along an angled track while tilted.

Sliding Gates

Because of their propensity to appear more substantial and to increase solitude, sliding gates are standard. These might be between $500 and $3,000.

Steel Electric Gates

Although heavier than aluminum gates, steel gates may be more cost-effective and long-lasting. Steel gates typically cost between $600 and $4000.

Swing Gates

Single swing gates are constructed from a single gate panel and swing open similarly to a regular bedroom door. Swing gates usually open inward to prevent them from expanding past the bounds of their guard property. Swing gates are the least expensive automatic driveway gate styles because they have the most straightforward opening mechanics. These gates are priced between $500 and $3,000.

Vertical Pivot/Lift Gates

These gates are prevalent in residences with constrained space, commercial buildings, and warehouses. Standard metal lift gates cost $500 to $4,000 on average. Costs for high-end oak or aluminum lift gates might reach or exceed $12,000.

Vinyl Electric Gates

Vinyl gates cost between $200 and $1,000, which is less expensive. Vinyl gates, on the other hand, are more prone to damage and have a shorter lifespan.

Wooden Electric Gates

Wooden gates can give a house a classy or attractive appearance, and a non-viewable gate also offers increased seclusion. The most expensive options are wooden gates, which cost between $300 and $4000. The better durability of some premium alternatives, such as cedarwood, comes at a higher initial cost.

Wrought Iron Gates

Wrought iron gates can be affordable, have a traditional aesthetic, and are strong. They don’t offer as much privacy as wooden gates do, though. Wrought iron gates typically cost between $600 and $4,000.

Cost To Install Gate

Additional Charges for an Automatic Driveway Gate

An automatic driveway gate installation typically costs between $820 and $3328. In making gate selections, this number must be taken into account.

The materials, dimensions, and features you select for your gate will determine its final cost, as will the labor cost in your area. Additional security features like cameras, motion detectors, and intercoms can raise the price of your gate by hundreds or even thousands of dollars. Costs for fully outfitted motorized driveway gates may exceed $12,000.

A Professional California Electric Gate Installation Company Here To Serve You

We repair and install everything from broken hinges, gate wheels, and gate tracks to post-repair. We can also install electric -gate motors, exit loops, and gate sensors if you need them. This makes us the ideal gate repair company for installing and repairing gate motors and repairing your electric gate.

Please send us a message, or call us for a quote. Use our quote request form to tell us more about your garage or gate repair, and we will connect you with the services that fit your needs. For emergency service, don’t hesitate to contact us by phone. Doing so can prevent a minor problem with your electric gate from developing into a substantial repair.

You will save money in the long run if you diligently check your electric gate condition. Do not hesitate to contact One & Only Garage Door and Gate Repair if you have any reason to believe that your electric gate may require repair in Los Angeles, San Diego, Pasadena, Long Beach, Torrance, Venice, West Hollywood, or Orange County, CA. We look forward to helping you!

Facebook
Twitter
LinkedIn