How Much For Garage Door Spring Repair?

A broken garage door spring is the most common cause of failure. If it snaps powerfully and hits your car or the garage ceiling, it can even cause more damage.

In the event of a broken spring, you may not be able to get your car out of the garage. You must have your springs repaired as soon as possible if they break.

Depending on where you live, the type of garage door you have, the type of springs required, and which company repairs, the garage door spring repair cost will vary.

different kinds of garage door springsDifferent Kinds of Garage Door Springs

Depending on the garage door you install, different types of springs exist. Knowing what kind of spring you have is essential to replace your door springs. A torsion spring or an extension spring is used for this mechanism.

  1. Extension Springs

    Visual inspection can help you identify what you have. You have extension springs when you have a door system with a thin, long spring running parallel to the door tracks. At high altitudes, you will find them.

  2. Torsion Springs

    On the other hand, torsion variants are pretty big and fat. You usually find them beside your garage door opener, resting on a giant metal rod. On the other hand, if you have a door that swings up in the air, it can be equipped with old vertical springs running on the sides and extension springs.

  3. Similarities Between Them

    The springs work the same way, regardless of how they look. When the garage door closes, they tense up due to the door’s weight and gravity. The heavy door can be lifted with great force through this method.

  4. Differences When It Comes to Force

    Extending springs stretch when loaded, whereas compression springs do not. In this way, energy is stored in an outward direction. While you lower the door, torsion springs twist. To release energy back, they untwist in the opposite direction.

What are the signs that a garage door spring is malfunctioning?

Garage doors go up and down multiple times daily, causing your springs to wear out quickly. Most owners take remote openers for granted. If it acts up, you need a solution as soon as possible because you need your car out of the garage. If the door is closed again, your belongings and property are most at risk.

Broken springs are the most frequent cause of garage door malfunctions. Despite the lack of a visible break, these signs will alert you to something amiss:

  • Strange squeaking sounds are heard.
  • There is also a possibility that your door will not open at all.
  • Garage door misalignment exists.
  • When you open your garage door, it opens a bit, then slams back down.
  • There is a dangling cable that usually attaches to the spring.
  • It looks like they’re off-course or crooked.
  • There will be a slow opening of the door.
  • There is a problem with the door getting stuck in the tracks.

It is important to remember that when the spring is compromised, the door cannot be lifted without too much force or power. Consequently, you will need help opening your garage door, whether you use an opener or manually. Attempting to yank it open forcefully can result in further damage.

Changing garage door springs is possible only if you have experience since springs are complex mechanisms. Without a heavy spring, this can be dangerous because it can cause severe injuries if the spring snaps. You must seek professional assistance if you need more confidence in this process.

How Much Will This Service Cost?

The answer will vary depending on what needs to be repaired or replaced. The cost of materials and labor for a residential garage door spring replacement ranges from $150 to $350. Depending on the type, you can expect to pay $30 to $75 per spring. Depending on the skill level, labor alone can cost $75 to $150.

Meanwhile, commercial garage doors are more expensive, costing $350 and up. Spring prices for commercial-grade springs range from $100 to $500. The labor cost for commercial springs ranges from $150 to $300. These services and parts cost more because commercial doors are heavier and get more wear and tear than residential ones.

Repairing the springs always entails replacing them. You can’t take any chances with a faulty garage door spring. Additionally, a typical garage door door has two springs. People often notice the first broken spring when the second one breaks.

If you notice that one spring is already compromised, you should replace both to ensure garage door balances—a faulty spring results in improper lifting. In addition, it indicates that the other springs will follow suit and give out. A cost-saving benefit of replacing both at the same time is that they will both be replaced at the same time.

Multiple doors will increase the price you pay. In addition, you can pay up to $500 if you need to replace other components. Additionally, your door may need to be balanced and the other parts lubricated. You can expect to pay between $50 and $100 for this more straightforward job.

Garage door springs typically last between 10 and 20 thousand cycles. They will eventually break when they are not adequately maintained and used heavily. In most cases, garage door springs are to blame for a malfunctioning door.

Garage Door Spring Replacement Prices and Specifications

It is often necessary to replace garage door springs after they are damaged because they are challenging to repair. Imagine it as a broken rubber band. The material cannot be put back together because you compromise its integrity. Sometimes, you can get by with a spring tune, which involves winding, balancing, or lubricating the spring to improve its performance. Below is a breakdown of how much each type of spring replacement costs.

  1. Torsion Spring Costs

    Replacing a torsion spring ranges from $75 to $150. Both materials and labor are included in this price. Depending on the model, DIYers can purchase the spring alone for $30 to $100.

    Both torsion springs above the door should be replaced at the same time. Life expectancy is 10 to 20 thousand cycles. The doors should last between 8 and 15 years, depending on how heavily you use them.

  2. Extension Spring Costs

    If you call the pros to replace the extension spring, you will spend between $50 and $100 on parts and labor. Spring prices alone range from $15 to $45. They are easier to install and less expensive than torsion versions because they are thinner.

    However, the poor build quality means they will only last for a while. This mechanism typically lasts between 8,000 and 15,000 cycles. That warranty is valid for approximately seven to twelve years. The warranty on most extension springs ranges from 3 to 5 years. Maintaining your garage door properly can extend the life of its springs.

  3. Spring and Cable Replacement Costs

    You are replacing a garage door, and cable ranges from $175 to $450. If you only need a cable replacement, we will charge you $75 to $200. However, it is cheaper to combine a cable and spring replacement. You may also need to replace the garage roller and drums, adding to your costs.

  4. Double Garage Door or Roll-Up Spring Costs

    Double-door springs cost an additional $15 to $30 per spring to accommodate all the extra weight. The labor costs will remain the same as repairing a standard spring.

No matter what type of door you choose, there is no difference in price. Depending on the type of spring, the cost will vary. However, the material, size, and space around your garage will affect the job’s difficulty. Professionals may have difficulty repairing springs or tightening certain parts if they can’t access the doors.

Repairing Garage Door CostsHow Important Is a Garage Door Tune-Up?

An inspection and maintenance by a garage door professional will extend the life of your garage door. You will be able to operate your door efficiently as a result. You can also reduce wear and tear by replacing worn-out parts before they break and using lubricants to avoid excessive friction.

Have your garage door system inspected once or twice a year for the best results. You can expect to pay between $50 and $150 for a tune-up. The price will vary depending on which parts must be lubricated or replaced. These services typically include:

  • Spring lubrication
  • Tension adjustment for springs
  • Balancing the door
  • Retightening loose nuts and bolts
  • Cable, drum, track, and roller inspection

You can also save money by doing your spring lubrication. To avoid any issues, use the proper lubricants from the hardware. For proper guidance, please read our article on proper garage door lubrication.

Are Extension Springs Convertible to Torsion Springs?

It is possible to convert your system to this model since torsion springs are thicker and more robust. With this one, you can expect a longer lifespan. To make the switch, you must budget between $400 and $800. It costs between $250 and $500 for the conversion kit alone.

Some old units find compatible hardware by chance. Torsion springs, however, require a new system for most doors. The old spring will be removed, and the following will be installed by a professional:

  • Torsion anchor or mount
  • Center bearing plate
  • Cable drums
  • Spring tube or rod
  • End bearing plates
Do springs have to be replaced professionally, or can they be replaced at home?

A professional should handle garage door springs. If the spring snaps accidentally, you can suffer severe injuries because it bears a lot of load and tension. Furthermore, the garage door can collapse if something goes wrong. The weight of a garage door is at least 150 pounds, which can damage expensive items and injure people.

It is, therefore, dangerous for someone without training to remove these springs. Even those with some handyman experience should leave this job to the professionals. A professional can handle the springs safely because they have the equipment and experience. Among the things they will do are:

  1. Ensure your garage door is not moving while work is being done by turning off its power source.
  2. Measure your existing door springs to determine which parts will work best.
  3. Remove the existing spring with specialized tools.
  4. Put the new spring in place.
  5. Ensure the tension of the new springs is optimal by winding them correctly.
  6. Please make sure the springs have been lubricated after they have been installed.
  7. If necessary, adjust the doors if they do not function properly.

It is important to remember that your garage door springs are under a lot of tension. Ultimately, it is responsible for carrying the entire door’s weight. When the heavy garage door lowers to the ground, it pushes down the large springs. In addition to carrying all the weight, they are under immense pressure. Your garage opener makes it easier to lift the heavy door when you need to open it again.

Before the problem escalates, call for a professional garage door repair inspection right away. Most likely, your garage door gets more use than your front entry door. Ultimately, it serves as the main entry and exit point.

Garage Door Spring Repair Company You Can Trust

Spring lubrication and tightening are your only options when it comes to springs. Otherwise, spring replacement should be left to professionals. Get in touch with our team of experts if you need professional garage door repair assistance.

One & Only Garage Door and Gate Repair can replace your door springs with the exact model to ensure your garage door functions smoothly. In addition to providing regular maintenance, we can also extend the life of your garage door system. Our past work can be viewed in the gallery on our website. As the region’s leading garage door and parts provider, we have many happy clients.